Skip to product details
Free Shipping in the Contiguous U.S.
My Favorite Chicken

Red Chicken Waterer Heater Plate | 48W Poultry Deicer

$49.99

  • 48W red chicken waterer heater plate: Helps keep drinking water available during freezing weather.
  • 12-inch low-voltage base: Uses the supplied 24V DC, 2A adapter and a 6 ft power cord.
  • Plastic and metal drinker compatible: Supports compatible poultry drinkers centered securely on the plate; the drinker is sold separately.
  • Thermostatically controlled: Designed for efficient cold-weather operation in a covered, dry, wind-sheltered location.
- +

Help keep your flock’s drinking water available through freezing weather with this 12-inch red chicken waterer heater plate. The 48W thermostatically controlled base works with compatible plastic or metal poultry drinkers and operates from the supplied low-voltage 24V DC adapter.

Reliable Winter Water for Backyard Poultry

Place a compatible poultry drinker directly on the level heater plate to transfer gentle warmth toward the bottom of the container. The bright red, weather-resistant PP plastic housing is easy to spot in a coop or covered run and is designed for chickens, ducks, turkeys, game birds, and other poultry.

The heater is intended to help prevent water from freezing, not to thaw a large container of solid ice. Product packaging rates performance to approximately -20°F (-29°C) under suitable conditions. Actual performance varies with wind, shelter, drinker size and material, water volume, placement, and ambient temperature, so check your flock’s water daily during severe weather.

48W Thermostatically Controlled Heating

The plate uses 48 watts of power and a 24V DC, 2A adapter. Thermostatic control helps regulate heating while the low-voltage connection supplies power to the plate. Allow up to approximately 15 minutes for the unit to warm after it is connected.

Works with Plastic and Metal Poultry Drinkers

The 12-inch round surface accommodates compatible poultry drinkers made from plastic or galvanized metal. Center the drinker on the plate and confirm that it is stable before connecting power. The poultry drinker shown in some photographs is for demonstration and is not included.

How to Set Up the Drinker Heater Plate

  1. Choose a sheltered location. Use the plate indoors or in a covered outdoor run where the heater, adapter, and every electrical connection will remain dry.
  2. Prepare a stable surface. Set the plate on a raised, flat, firm surface with the feet facing down. Keep loose bedding and combustible material away from the heater and cord.
  3. Connect the supplied adapter. Attach the heater lead to the supplied 24V DC, 2A power adapter, then position the adapter and connection where poultry cannot reach them.
  4. Center the drinker. Place a compatible plastic or metal poultry drinker on the plate without pinching the cord.
  5. Plug in and monitor. Connect the adapter to a properly installed outlet, allow the plate to warm, and continue checking the water supply and installation daily.

For additional cold-weather flock planning, read our winter chicken care guide.

Red Chicken Waterer Heater Plate Specifications

  • SKU: DKRPLT12
  • UPC: 850072805122
  • Product type: Heated base for compatible poultry drinkers
  • Color: Red
  • Diameter: 12 inches (30.48 cm)
  • Power: 48 watts
  • Input to heater: 24V DC
  • Power supply: 24V DC, 2A adapter
  • Power cord length: 6 ft
  • Heating control: Thermostatically controlled
  • Compatible drinker materials: Plastic and metal
  • Housing material: PP plastic with TPR cable material
  • Use location: Indoor or covered outdoor use
  • Country of manufacture: China

What Is Included

  • One red poultry drinker heater plate
  • One 24V DC, 2A power adapter
  • User instruction sheet

Important Safety Information

  • The heater plate is not waterproof. Do not immerse, flood, hose down, or operate it in standing water.
  • Keep the plate, power adapter, and every electrical connection dry.
  • Use only the supplied 24V DC, 2A adapter.
  • Do not use a damaged, modified, or repaired cord, connector, adapter, or heater.
  • Route the 6 ft cord where poultry cannot peck, pull, or trip over it.
  • Disconnect power and allow the plate to cool before cleaning, moving, or inspection.
  • Wipe the plate with a damp cloth and mild soap, then dry it completely. Do not immerse the plate or adapter.

Download the red poultry drinker heater plate instructions (PDF).

Looking for an adjustable, lower-wattage option? Compare our 28W chicken waterer heater base for compatible round drinkers.

Frequently Asked Questions

Is a poultry drinker included?

No. This product includes the red heater plate, 24V DC adapter, and instructions. The poultry drinker is sold separately.

Can I use it with a plastic chicken waterer?

Yes. The plate is designed for compatible plastic or metal poultry drinkers. Center the drinker on the 12-inch plate and confirm that it remains stable.

Can the heater be used outdoors?

Use it only in a covered, wind-sheltered location where the plate, adapter, and electrical connections remain dry. It is not waterproof and must not be exposed to rain, melting snow, flooding, or standing water.

How long does the plate take to warm?

Allow up to approximately 15 minutes for the plate to warm. Cold-weather performance varies with shelter, wind, water volume, drinker material, and outside temperature.