Manual Sliding Chicken Coop Door Kit
The Classic Chicken Coop Door Kit is a door-only vertical sliding system for a new coop or replacement pop door. It includes a lightweight aluminum panel, solid American red-oak runners, and mounting screws. Use it manually or connect it to a compatible pull-cord automatic opener. An automatic opener is not included.
Need the controller and door together? Compare the ChickenGuard PRO automatic chicken coop door kit, a complete opener-and-door package with classic oak runners.
What Is Included?
- One 12 × 16-inch precision-cut aluminum door panel
- Two 24-inch solid American red-oak runners
- Stainless-steel mounting screws
- Pre-drilled hole for attaching a compatible lifting cord or cable
Manual Use and Automatic Opener Compatibility
The aluminum panel can be raised and lowered manually. If you are comparing operating styles, see our guide to automatic and manual chicken coop doors. It can also be paired with many automatic chicken coop door openers that lift a vertical door by cord or cable. Compatibility is not universal. Before ordering, confirm the opener lift capacity, attachment method, required travel, and installation clearance.
Always test the door through its full travel by hand before connecting an opener. Follow the opener manufacturer’s installation, setup, and safety instructions.
Measure Your Coop Opening
The 12 × 16-inch measurement describes the aluminum panel, not the recommended rough-opening size. The closed panel should extend beyond the finished opening so gaps are not left around its edges. Measure the coop wall, opening, and available vertical space before installation.
The two runners are each 24 inches long. Installation requires a flat, vertical mounting surface and enough unobstructed space above the opening for the panel to rise. Suitability for chickens, ducks, or geese depends on the size of the individual birds and the finished opening; measure rather than assuming one opening fits every breed.
Installation and Outdoor Care
- Seal or paint all oak surfaces with an appropriate exterior finish before outdoor exposure.
- Mount the runners plumb, parallel, and on the same plane.
- Insert the panel and confirm that it moves freely without catching or binding.
- If adding an opener, attach its cord or cable at the pre-drilled hole and follow the opener instructions.
- Periodically remove dirt and bedding from the runners and inspect the finish, fasteners, and door travel.
Security and Daily Checks
This classic sliding chicken coop door is not self-locking and should not be treated as guaranteed predator protection. It is one component of a secure coop. Use our predator-proofing checklist to review the surrounding coop and run as well. Confirm that the closed panel overlaps the opening and evaluate the installation for lifting or prying risks. Where additional resistance is needed, use an appropriate separate anti-lift solution or choose a self-locking door system designed for that purpose.
After installation, observe several complete opening and closing cycles. Keep the travel path clear and continue routine flock counts and coop-security checks even when the door is connected to an automatic opener.
Product Specifications
- Door panel: 12 inches wide × 16 inches high
- Runner length: 24 inches each
- Door material: Precision-cut aluminum
- Runner material: Solid American red oak
- Included hardware: Stainless-steel mounting screws
- Operation: Manual or compatible pull-cord automatic opener
- Made in Texas, USA
Chicken Coop Door Kit FAQs
What comes with the Classic Chicken Coop Door Kit?
The kit includes one 12 × 16-inch aluminum door panel, two 24-inch solid American red-oak runners, stainless-steel mounting screws, and a pre-drilled hole in the panel for a compatible lifting cord or cable. An automatic opener is not included.
What size coop opening will this door fit?
The aluminum panel measures 12 inches wide by 16 inches high, but that is not the recommended rough-opening size. The closed panel should overlap the finished opening. Measure the opening, wall, birds, and available vertical clearance before installation.
Can this sliding chicken coop door be used manually?
Yes. The aluminum panel can be raised and lowered manually. Keep the runners aligned and free of bedding, dirt, and other debris so the panel can travel smoothly.
Will this door work with an automatic chicken coop door opener?
It can work with many pull-cord or cable openers designed to lift a vertical door, but compatibility is not universal. Confirm the opener lift capacity, attachment method, travel, and clearance requirements before purchasing or installing it.
How should the oak runners be prepared for outdoor use?
Seal or paint all oak surfaces with an appropriate exterior finish before exposure to weather. Inspect the finish and mounting hardware periodically, and remove debris that could interfere with door travel.
Is this chicken coop door self-locking or predator-proof?
No. This is a classic vertical sliding door and is not self-locking or guaranteed predator-proof. Evaluate the completed installation for lifting and prying risks, and use a suitable separate anti-lift solution or self-locking system where additional resistance is needed.
